Portable energy storage power supply refers to the mobile power supply, which refers to the device that can directly charge the mobile device through the AC power supply and has a power storage unit that can charge the device without the AC power supply. The portable energy storage power supply has an AC plug that can directly charge the mobile device.

    The following matters should be noted when using portable energy storage power sources outdoors

    service environment

    The environmental position of the portable energy storage power supply needs to be noted. The placing location needs to be far away from water, combustible gases and corrosive items, and must have good ventilation effect. The ambient temperature is best kept at 0-40℃ and can better guarantee the working efficiency of portable energy storage power supply.

    Use the operation

    After placing the portable energy storage power supply, it is necessary to start up and after the operation. First turn on the main switch, then the power display light will be displayed as green. After opening the switch, it is necessary to check the load input voltage and frequency. Then check the power of the load to make sure it does not exceed the rated power of the machine. After using the portable energy storage power supply, the power supply can be turned off.

    charge

    When charging the portable energy storage power supply, it is necessary to use the power supply charger specially equipped by the manufacturer. When the solar energy charger is used to charge the power supply, it is also necessary to pay attention to whether the input voltage and current are suitable.

    The LED power display light flashes continuously during charging. When the power supply is charged to 100%, the LED power display light will stop flashing, which means that the power supply has been fully charged.

    overload

    When using the portable energy storage power supply, it is best to calculate the size of the load first, and try to avoid the power supply load is too large or too small. The load will make the portable energy storage power supply work in the state of overload for a long time, which will seriously shorten the service life of the energy storage power supply cell.